ALEC SHOKUNIN KATAGI PRYING TOOL KODZILLA japan NEW

Modeling/modeling aids, etc. When you have trouble with snap-fit model parts that are too tight to be easily removed from each other, you can open them by cogging them open! (1) Luxurious use of 0.4mm thin steel. Finished with 3 micron nickel plating. (2) The upper wooden part is made of hard Bubinga wood with an oil finish, and both ends are shaped to fit nicely in the hand. (3) The tip of the blade is ground one by one by a saw craftsman to make it thin enough to be inserted into even the smallest of spaces. (4) Both sides of the bottom of the blade are handmade. (4) Both sides of the bottom of the blade are shaped to fit the fingers when held in the hand. This allows you to apply force without strain. There is no need to worry about hurting your fingers. (5) There is no need for troublesome work such as cutting or shaving the pins of each part. Also, there is no need to worry about damaging parts due to the shape of the blade at the tip. Caution *Please note that there is a possibility of damaging parts if the product is used in an unreasonable manner. What is a snap-fit model? Snap-fit refers to a method of fixing plastic models and other parts by simply combining them without using adhesives. Plastic models that can be assembled without using adhesives are called snap-fit models or snap-fit kits. Product Size Total length 65mm Specifications and prices are subject to change without notice due to product improvement. Please note that specifications and prices are subject to change without notice. [Planning] Shimomura Alec, Inc. http://shimomura-alec.co.jp [Sales]Platz http://www.platz-hobby.com/