Fujimi 1/700 Special Series No.42 Japanese Navy Aircraft Carrier Unryu (Completion/Final) japan NEW

New parts are added to the “Unryu”, the first ship of the Unryu class, which was planned to strengthen the carrier's capability before the start of the Pacific War! The product is based on the motif of the final form at the time of completion in August 1944 and the final form after that when the fountain gun was added, and you can select/build either form. The shape of the simplified construction is not seen, which is different from Amagi and Katsuragi, and the conventional rounded sponson shape is reproduced. Newly designed parts are prepared to unify the differences in reproduction of equipment, etc. depending on the product release date, and some parts are also divided in consideration of painting work. The No. 13 electric probe is a new enclosed part that is sculpted into a truss structure, and the aerial part is also a shape expression. The No. 21-6 electric probe for the bridge section and the base of the insulator for fixing the element on the front side are expressed with more delicate engravings than the conventional included parts. The 12.7cm anti-aircraft gun A1 Kai-1 has been subdivided into 6 parts, and the molding resolution has been increased from the existing 2 parts. The 9-meter cutter is made of 2 parts for painting, and the trestle is made of separate parts, which can be selected from the deck integrated molding. The 12-meter inner gunboat has separate parts for the canvas and wheelhouse/mechanical room canopy for painting. Each part is painted and assembled and glued afterward. The 3-part configuration has the main body of the boat and the floor of the loading area as separate parts, and can be assembled after painting, eliminating the need for masking. The 12-meter inner fire launch can be represented without canvas. The base of the boat is molded with uneven shapes and light holes for a more precise molding. The chrysanthemum crest on the bow is newly prepared. A pair of port lights, which have been omitted from the molding, are provided as additional parts. Decal with the name of the aft ship (in the color of the warship) has been added. The standard specification for the Type 96 25mm triple machine gun / single machine gun is a two-part configuration, which reduces the painting/separation work. Four models (Zero-sen Type 52, Type 21 (bombardier), Comet Bombardier Type 12, and Tenzan attack) are included, six of each. Six special attack aircraft Sakurabana are included. The hull is divided into left and right sections. The porthole windows on the porthole side are reproduced in a reduced number due to the lessons of the war. The anchor chain deck of the bow is a single piece with non-slip strips, bollards, hawser reels, and anchor chains sculpted in three dimensions. The flight deck consists of one part, and the elevator is a separate part. The surface is sculpted with various shapes such as airplane mooring rings, landing brake cables, and expansion joints. The wind shield is sculpted on the flight deck. The Yinken Type 21 electric searchlight and two submarine searchlights on the flight deck are selectable between retracted and deployed states. Elevator can be assembled in ascending or descending state. The truss structure on the aft side of the flight deck is sculpted in three dimensions. The crane on the flight deck is in the retracted state and the crane is in the retracted state. The bridge base is a one-piece molded part using a slide mold. The chimney is a top and bottom split part, and the inner conductor plate is detailed with a separate part. The funnel caps are molded with a sense of precision in a “detached” state. Binocular telescope parts are included on the bridge (air defense command center) to increase the sense of precision. The machine gun and gun turrets on the port side are separately sculpted, and the strips on the floor are sculpted in fine detail. The machine gun turrets and the high-angle gun sponsons are reproduced with finely molded parts. The port side outfitting is made up of a variety of different parts, including the radio aerial pole and landing lights. The 25mm triple machine gun is precision molded and comes in two parts for easy painting. Four types of shipboard aircraft are included, a total of 22 aircraft. Four types of aircraft are included: Zero Fighter Type 52, Zero Fighter Type 21, Comet, and Tenzan, all owned by the 601st Air Squadron, which existed as a ship-based unit after the completion of construction. Four Type 52 Zero fighters are included, and the windshield and propeller are separate parts to allow for painting. The Type Zero fighter Type 21 (bombardier) comes with 4 planes, and both wing tanks and 250kg bombs under the fuselage are separately reproduced. The Comet Type 12 bomber has a windshield, propeller and 60kg bombs as separate parts for easy painting. Four Tian Shan surface attack planes are included, with their characteristic 4-wing propellers and 250kg bombs suspended under the fuselage as separate parts. Six “Sakurabana” special attack planes, which were loaded in the hangar during the transport operation at the time of the sinking, are included. The main parts are molded in light green color for anti-submarine camouflage paint. The main parts are light green for anti-submarine camouflage coloring, and the gun parts are gray. Two types of decals are included. One decal is included for marking the camouflage pattern on the flight deck and the onboard aircraft. One decal is included for the white lines on the stern name and prop. [Included] Runner x66 ・Instructions for assembly x1 ・Decals x2 Please note that colors may look different from the actual product due to monitor and image resolution issues. (From Fujimi Models website)