Plamo Improvement Commission DRIPLESS INNER CAP 02 (FOR T COMPANY 10ML CYLINDRICAL BOTTLE) (6PCS) japan NEW

For modeling/modeling aids, etc. When removing paint from a paint bottle, paint can adhere to the edge of the bottle or screw groove, causing hassle in wiping off and wastage of paint, which can also cause the lid to stick. The Tareuna Inner Cap is a special inner cap that is attached to the paint bottle to pour paint without dripping and to make it easier to remove paint from the bottle. After use, the cap can be stored with the bottle lid closed. The lineup includes five different shapes, making it compatible with a wide range of model paint bottles. Features. Simply open the lid and insert the cap. Just one-touch installation of the Tareuna Inner Cap, which matches the diameter of the paint bottle, is all that is required to complete the installation. The ultra-thin cap design allows even highly viscous paints to drip easily and pour cleanly without contaminating the bottle edge or screw groove. Paint can be removed directly from the bottle without the use of a stirrer, muddler, or other tools, reducing paint wastage. The solvent-resistant material makes it compatible with water-based, lacquer, and enamel paints. *Please mix the paint well before use. When pouring paint, pour slowly and return slowly. Before attaching the Tareuna Inner Cap, wipe off any paint on the paint bottle spout (the surface in contact with the Tareuna Inner Cap) with a cotton swab or similar tool. The cap can be closed with the cap in place! After removing paint, the lid can be closed without removing the Tareuna Inner Cap from the bottle. The special shape of the cap prevents paint from leaking and keeps the bottle tightly sealed. When it is time to use the paint again, simply open the lid and pour out the paint as before, eliminating the need to reattach and clean the bottle. In addition, paint is less likely to adhere to the bottle's edge or threaded groove, thus relieving sticking of the lid due to dried paint. *If paint remains on the edge, wipe it off before closing the lid. When the Tareuna Inner Caps [01] - [04] are attached, the overall height of the lid when closed will be slightly higher than when the lid is not attached. The height of the Tareuna Inner Cap [05] is slightly higher than that of the lid without it. Great for storing airbrush paint! By diluting paint with an empty spare bottle fitted with the Tareuna Inner Cap, paint can be poured directly into the airbrush cup without dripping. The spare bottle can be closed to save and reuse the leftover diluted paint, reducing paint waste and improving painting efficiency. Compatible with various model paints! Five types of bottles are available to accommodate a variety of common model paints. Tare-nai Inner Cap [01] (for T Company 10ml square bottles) Tare Inner Cap [02] (for T Company 10ml cylindrical bottles) (this product) Tare Inner Cap [03] (for Company C 10ml Cylinder Bottle) Tare Inner Cap [04] (for Company G 15ml Cylindrical Bottle) Tare Inner Cap [05] (for Company G's 50ml cylindrical bottle) Tare-na Inner Cap [04] is only compatible with lids with integrated stopper. Tare-na Inner Cap [05] can be used with both lids with an integrated stopper and lids with a separate stopper. When using a lid with a separate inner cap, be sure to close the lid after fastening the inner cap. The G 10ml cylindrical bottle, 30ml cylindrical bottle, and paint bottles that do not have an integrated lid and stopper are not compatible with this product. Product Specifications ◆Size Inner Cap [02]: approx. φ29 x H11mm ◆Set Contents Tareuna Inner Cap [02]: 6 pieces (for Company T 10ml cylindrical bottle) Precautions This product does not completely prevent dripping. Dripping may occur depending on the condition of the paint and the pouring method. Please mix the paint well before use. This product is for model paints only. Do not use as a solvent spout. （Do not use this product as a solvent spout, as it may cause leakage or dripping.) The lid will be shallow when closed due to the product's specifications. If the lid is closed too tightly, the product may deform, causing the lid to leak or come off. If the lid is closed with the edge of the product still dirty, it may be difficult to open. If the paint remains on the edge of the bottle, wipe it off with a cotton swab to remove any residue. Please be sure to store the paint bottle upright to prevent leakage. Depending on the type of paint, the color of the paint may migrate to this product. When reusing the same color paint bottle, be sure to use a new paint bottle for each paint. When reusing the product, attach it to a paint bottle of the same color. To maintain the tight seal, wipe off any paint remaining on the spout after use and close the lid. Please note that the product may not be attached properly depending on the individual differences or combination of the product and the bottle. Please follow the paint manufacturer's instructions for handling paint. If you experience any problems when using this product, please contact the Plastic Model Improvement Committee Customer Support.