Tamiya Tamiya Airbrush System SPRAY-WORK AIR COMPRESSOR ADVANCE W/SPARMAX AIRBRUSH SX 0.5D

Model making airbrush / compressor

【Compressor with air output adjustable, sensor type switch and airbrush set】
Air pressure adjustable compressor.
The air output can be adjusted by turning the dial on the top of the main unit.
It supports a wide range of airbrush painting, from glossy painting with a large area to fine blowing such as delicate camouflage painting.
The compact body also features good handling.
In addition to the main switch, a sensor switch that automatically activates when the air brush is removed from the hanger is installed.
Painting work proceeds smoothly.
Includes a transparent curl hose that makes it easy to see the water droplets inside.
With 0.5mm nozzle diameter Sparmax airbrush SX0.5D.

[Basic specifications]
● Power supply is household AC100V (50Hz / 60Hz)
● Approximate dimensions 12.5 × 7 × 11.5cm (* 10cm depth including hanger)
● Maximum air pressure about 0.20MPa (30PSI)
● Continuous air pressure 0.08MPa (12PSI)
● Air discharge rate 10L / min (no load)
● Power consumption 24W
● Operating volume 45db
● Weight approx. 0.6kg (* excluding cords and accessories)
● Accessories AC adapter, curl hose
● Nozzle diameter of Sparmax airbrush SX0.5D is 0.5mm
● Cup capacity is 15cc｡

-The body is made of compact resin.
Use a transparent curl hose to connect the airbrush.
Various air brushes can be attached to the hanger.
-With 0.5mm nozzle diameter double action type airbrush for active spraying of large areas and clear blow.
-Air output can be easily adjusted with the dial at the top of the main unit.
・ Adopts a sensor switch that turns the power ON when lifting the air brush from the hanger and turns OFF when returning it.
Eliminates the hassle of turning on and off the power when painting.

Information is as of January 31, 2020. Product names, prices, release dates, specifications, etc. are subject to change without notice.

(From the Tamiya website)