3 recommended nippers for Gunpla biginners and How to use them

Cut with plastic nipper!！

Plastic model nippers are made for cutting plastic, so they have a flat cutting surface.

The blade is also thin, so it is easy to get into a fine gap.

Normal nippers sold at home centers are designed to cut metal wires, so the blade is thick and the cutting surface is not as flat as it is for models.

However, plastic model nippers have thin blades and are easy to chip, so please handle them carefully.

3 Recommended Nippers

Tamiya 74093 Modeler's Nipper Alpha

-Sharpness :★★★☆☆

-Durability :★★★★★

-cost performancey:★★★☆☆

This is an introductory nipper.

It's perfect for kids who want to build their first Gunpla plastic models or mini 4WD.

Simple, lightweight, and inexpensive, it's also a good first one for those who aren't used to handling these tools.

Needless to say, the gate marks were also cut cleanly, and the level of perfection was increased just by using the nippers.

TAMIYA Side Cutter for Plastic

-Sharpness :★★★★☆

-Durability :★★★★☆

-cost performancey:★★★★☆

Isn't it probably the nipper with the most users in the plastic model world regardless of the genre?

The thin blade can penetrate even small gaps, and the sharp edge of the blade is impeccable.

The grip and crossings are solidly built and durable.

If you can't get enough of this, I think you should buy a more upscale one.

GOD HAND Ultimate Nipper 5.0

-Sharpness :★★★★★

-Durability :★★☆☆☆

-cost performancey:★★★☆☆

It is a famous nipper in the Gunpla world, which is touted as the "ultimate sharpness".

Other nippers are double-edged, but this one has an ultra-fine single blade.

The person who purchased it said, "The world has changed! How about the step up for those who are not satisfied with thin blade nippers?

However, since it is a thin blade, the blade is often chipped, so you have to handle it carefully.

Also, due to the artisanal finishing process, the number of arrivals and the production itself is very little.

Correct use of the nippers: double slicing

When separating a part from a runner in Gumpra plastic model, I use the usage called cutting twice.

By cutting twice, the excess force is not transmitted to the parts, preventing whitening trouble, and burrs are less likely to remain.

How to cut twice?

(1) Cut the first time at a distance.

(2) Second time, put the back straight to the parts and cut.

When cutting, insert the blade from the thinner side of the gate cross-section to separate it.

conclusion

Nippers are the first tool required for making plastic models.

Depending on your production style and understanding of the tools, it is best to choose the most cost-effective one.

With less trouble, you can enjoy your hobbies stress-free.