Fujimi 1/350 IMPERIAL JAPANESE NAVY AIRCRAFT CARRIER KAGA SPECIAL SPECIFICATION (OPERATION MI / BATTLE OF MIDWAY) japan NEW

Modeling the appearance at the time of MI operation that participated as the capital ship of Nagumo MTF! The product is an unpainted kit that requires adhesive assembly and painting. The scale is 1/350, and it is a full hull style including the bottom of the ship. The aircraft carrier "Kaga" is under construction as the second Tosa-type battleship, and was completed with an aircraft carrier as a replacement for the Amagi damage under construction due to the Washington Naval Treaty and the Great Kanto Earthquake. Initially, it had a multi-layered deck, but it was renovated in the modern style of all decks at the Sasebo Naval Arsenal in 1934. In the Pacific War, he played a part in the main aircraft carrier unit in collaboration with Akagi, Hiryu, Shokaku, etc. He was hit by an air attack by the unit and was killed in the war. ● The product can reproduce the appearance at the time of the Battle of Midway in June 1945. -Comes with a special decal including the Hinomaru for identification drawn on the front edge of the flight deck. -A total of 75 carrier-based aircraft are included, which are the actual number of aircraft at the time of MI operation, "21 Zero Fighter, 27 Ninety-nine Ship Bombs, 27 Ninety-Seven Ship Attacks". ● It can be made with the modeling expression unique to 1/350 large scale. -The hull / bottom is an integrated shape, and left and right are bonded together. -The armor plate on the side and the steel plate on the bottom of the ship express the seams and thickness, and the bottom surface expresses the water supply and drainage ports. -The flight deck consists of three pieces: front, middle, and rear. -The steel deck at the front has a concave engraving on the seams. It also expresses the preparatory modeling of catapult equipment. -The wooden deck in the center of the flight deck reproduces the appearance of the board being tense with a delicate sculptural expression. -The rearmost part expresses a non-slip strip pattern with a convex mold. -The landing braking cable and anti-skid device are reproduced with the attached etching parts. -The windbreak fence can be selected from two types of upside down, and when standing up, the back side is also expressed. -The truss structure on the back of the flight deck is made into a separate part from the flight deck, and the ones in the front and rear positions are available. -The crane on the back of the stern flight deck has a one-piece rail and multiple separate pillars for a hollow shape. -The bow flight deck support can be selected from 4 or 6 settings. -The bow anchor deck uses metal parts in addition to plastic parts. -The linoleum floor at the rear of the ship and part of the side sponson expresses the presser with delicate sculpture. -The floor surface of the 12.7 cm high angle turret reproduces the strip pattern firmly with a convex mold. -The elevator for carrier-based aircraft can be selected from either the ascending state or the upper hangar position. -The elevator is also molded with an eye ring for fixing the carrier-based aircraft. -The base of the bridge is divided into left and right, and the upper layer is a laminated parts structure, and the entire circumference is molded. -The appearance of the binocular telescopes for watching is lined up at the top with separate telescope parts. -The searchlights installed on the bridge and the windows of the Rashinkanbashi are transparently molded. -The chimney is composed of two parts, upper and lower, and the depth of the chimney is expressed. -The 25mm machine gun consists of 4 parts for realistic modeling with split parts. -The 12.7 cm high angle gun (with shield) has a separate part for the shield and barrel. -The 12.7 cm high angle gun is composed of 6 parts, and the recoil buffer / propulsion device on the barrel is also shaped. -The rudder reproduces the unevenness and curved surface of the surface and frame. -Comes with three types of carrier-based aircraft: Type 0 fighter, Type 99 ship bomber, and Type 97 carrier-based attack aircraft. -The molding color is transparent, and the canopy feels real when completed. -There are 3 types of attached decals, including flight deck white lines and carrier-based aircraft markings. -Comes with a pre-cut paper sticker including signal flags, warship flags, and general flags. Molded parts are available in three colors: gray, transparent, and black. Completion dimensions 71 x 9.2 cm (length x width) [Attachments] ・ Runner x94 ・ Assembly manual x3 ・ Decal x6 ・ Metal parts x2 ・ Paper sticker x1 * This product is made in Japan. * This product is a plastic model kit that requires assembly.