Fujimi 1/700 Special Series No.21 Japanese Navy Aircraft Carrier Taiho (Wooden Deck) japan NEW

New parts are additionally enclosed in the aircraft carrier Oho, which has a distinctive shape with an enclosed type bow, a chimney integrated with the bridge, and armored! The product is an unpainted kit requiring adhesive assembly and painting. The scale is 1/700 and is an offshore model not including the bottom of the ship. The product is composed of conventional (special series) molds and newly designed additional parts. The product is based on the motif of the appearance at the time of completion - the Battle of the Mariana. The flight deck with various theories is the specification of the inclusion of dedicated parts carved in the motif of a wooden deck. Newly designed parts are available to unify the differences in the reproduction of equipment, etc. depending on the time of release of the product, some parts are also divided in consideration of the painting work. The No. 21 electric probe is expressed with more delicate sculpture than the conventional attached parts, such as the base of the insulator for fixing the element on the front side. The canvas and wheelhouse/machine room canopy of the 12-meter inner gunboat are separate parts to allow for painting. Each part is painted and assembled and glued afterwards. The 3-part configuration has the main body of the boat and the floor of the loading area as separate parts, and can be assembled after painting to eliminate the need for masking. The 12-meter inner launch can also be rendered without canvas. Newly prepared chrysanthemum crest on the bow. A pair of port lights, which have been omitted from the molding, are provided as additional parts. Decal with the name of the aft ship (in warship color) has been added. The Type 96 25mm triple machine gun is now standardized as a two-part part that requires less painting/separation work. Four models (Zero-sen Type 52, Type 21 (bomber), Comet, and Tenzan) are included in accordance with historical facts. Binocular telescope parts are added to the air defense command post. The 9-meter cutter is made of two parts for painting, and the base has separate parts, which can be selected from the deck integrated mold. The base is molded with uneven shapes and light holes for a more precise molding. (Positive description is not necessary because the parts are not indicated for use in the installation, but are intended as service parts for replacement. The hull is a one-piece structure with port and starboard sides, so there is no need to glue or erase the joints. The sealed anchor deck is also provided with reproducible parts, and the interior can be seen through the opening. Porthole windows are sculpted in concave and convex to reproduce the eaves. The flight deck is carved of wood and consists of a single molded part from bow to stern. Elevator can be assembled in either raised or lowered into the hangar. The truss structure on the aft and underside of the flight deck is sculpted in three dimensions. The searchlight on the flight deck is in the retracted state and the crane is in the upright state. The bridge base is a one-piece molded part with sculptures on five surfaces using a slide mold. The chimney, integrated with the bridge, is a split left and right part, and the steam dump pipe and prop are detailed with separate parts. The funnel caps are "pulled off" and molded with a sense of precision. Binocular telescope parts are included on the bridge (air defense command center) to increase the sense of precision. The port side gun turrets and machine gun turrets are separately sculpted, and the floor strip pattern is sculpted in fine detail. The 10cm long anti-aircraft cannon, which is one of the features of the Oho, is provided as a special part for the Oho. A variety of port side outfitting parts such as radio aerial pole, landing guidance lights, and rattar are separately produced. The 25mm triple machine gun is precision molded and comes in a two-part design for easy painting. The shipboard planes include four types of aircraft from the Battle of the Mariana in June 1944, a total of 16 planes. Four Type 52 Zero fighters are included, and the windshield and propellers are separate parts for painting. The Type Zero fighter Type 21 (bombardier) comes with 4 planes, and both wing tanks and 250kg bombs under the fuselage are separately reproduced. The Comet Type 11 bomber is included with 4 planes, reproducing the unique shape of the model with liquid-cooled engines. Four Tian Shan surface attack planes are included, with separate parts to reproduce the characteristic 4-wing propellers and the 250 kg bomb suspended under the fuselage. The port side high-angle gun turret and machine gun turret are also included as separate parts, and the striped pattern on the floor is represented by detailed engraving. 15 aircraft are included, 5 each of Zero fighter 21, 99 bombers and 97 attack planes are included. Molded in gray color for main parts, bottom plate, aircraft, gun parts, etc. Three types of decals are included. One decal is included for marking onboard aircraft. One decal is included for the white line of the stern name and prop. One decal is included for the Oho, which includes flight deck markings and the flag of the warship. 【Included contents】 Runner x41 ・Instruction manual x1 ・Decals x3 Please note that colors may look different from the actual product due to monitor and image resolution issues. (From Fujimi Models website)