Fujimi 1/700 Special Series No.108 EX-1 Japanese cruiser Yahagi (1945/1944) japan NEW

New light cruiser of the treaty-less era - Appeared in selectable specifications at the time of the final sortie with the Yamato and at the time of 1944 (Basic specifications) The product can be selected from multiple year states. The last appearance of the ship that sailed to Okinawa with the Yamato in April 1945 in Operation Ten Ichigo, equipped with 28 25mm single-barreled machine guns. After the Battle of the Marianas from the end of June 1944, she was equipped with 18 25mm single-barreled machine guns, and before the shape of the air working deck was changed. The figure shown is from the Battle of the Marianas in June 1944, when the single machine gun had not been augmented. (Structure, specifications, and features) The modern shape of the Agano type, which is different from the trend of Japanese light cruisers up to that time, has been reproduced in its entirety. The hull is designed with split left and right parts. The porthole windows are reproduced with specially designed parts, which are closed and reduced in number compared to when the ship was completed. The outer electrical circuit running around the entire perimeter of the porthole is delicately sculpted, even the clasps are represented. The deck and bridge are sculpted to represent the linoleum lining and the anti-skid and strip patterns of the steel deck. The bridge forward shelter is an integral part using a slide mold. The side walls are sculpted and shaped with precision. The main gun turret is a slide mold with windows, lattice and steel plate joints on the side and top surfaces. The chimney top grating is sculpted realistically in a loose state, and the internal rectification plate is also sculpted as a separate part. The chimney is designed in separate parts for the left and right sides, and the monkey rattles are sculpted in detail. The steam dumping pipes are separately designed parts to express the difference from the sister ships. The triangular pyramidal truss at the bottom of the mast has been removed using a slide mold. The small cranes on both sides of the aft end of the aviation work deck are accurately and three-dimensionally reproduced as separate parts. The 4.5 meter high angle rangefinder has been accurately reproduced with its cylindrical arms and is included as a dedicated part. The electric probe No. 22, port ladder (retractable), azimuth antenna, and auxiliary wing storage are all included as separate parts. The shield and barrel of the 8cm long anti-aircraft gun are included as separate parts and newly designed exclusively for this model. The water reconnaissance crane has been reproduced up to the light hole on the side to increase the sense of precision. Two Type Zero (three-seater) water reconnaissance planes are included. Molded in clear color for a realistic windshield (standard color is gray). (The standard version is molded in gray.) ・Two types of decals are included. Two types of decals are included: one decal for marking the onboard reconnaissance plane and one decal for the aft ship's name and the white line on the mast. The PLUS version differs from the standard version in that the following replacement parts are included. 25mm machine gun: Precision molding, two-part structure for easy painting. Binocular telescope: The bridge air defense command post comes with binocular telescope parts for reconnaissance lookout to increase the sense of precision. No.13 electric probe: Newly included parts with sculpted truss structure and aerial part shape expression. No.21 electric probe: The base of the insulator for fixing the element on the front side is more delicately sculpted than the previous included parts. The No. 22 electric probe can be made into an open part by using a slide mold, and the trumpet shape can be made into an extended shape. 9-meter cutter: 2 parts in consideration of painting. (except for some parts) Chrysanthemum crest: Newly prepared chrysanthemum crest on the bow. Port light: Newly prepared, for additional expression in parts that have been omitted until now. [Included contents] Runner x36 ・Instructions for assembly x2 ・Decals x2 Please note that colors may look different from the actual product due to monitor and image resolution issues. (From Fujimi Models website)