Fujimi1/700 Special Series No.102 EX-1 Japanese cruiser Isuzu (1944) (plus Edition)

This kit depicts the ship as it appeared after September 1944, following its conversion from a single-gun cruiser to an anti-aircraft cruiser with high-angle guns. (Basic Specifications) ・This is a glue-together kit featuring highly detailed construction designed for precision modeling. ・The parts are primarily gray, allowing you to enjoy painting as you assemble the model. ・Unlike the STD version, the PLUS version includes clear parts for certain components to enhance realism (Items marked with ★ are exclusive to the PLUS version) ・The model depicts the ship as it appeared after being refitted in September 1944, with the 14 cm single-mount guns replaced by 12.7 cm twin-mount anti-aircraft guns → The hull features the removal of the forward torpedo tubes and the installation of a crew waiting room → The torpedo tubes have been replaced with quadruple launchers → Radar equipment includes a Type 21 radar on the bridge and Type 22 and Type 13 radars on the aft mast → Equipped with a 10-meter cargo ship (Structure, Specifications, and Features) ●Hull ・Constructed as a single, integrated left-right unit 　→No external wiring; shape represents the configuration during post-modification sea trials 　→Reflects the configuration with the forward torpedo tubes removed and a crew waiting room installed 　→Portholes represent the configuration where, based on wartime experience, they were sealed off to a minimum number ・The hull bottom is designed to fit into the inner side of the hull, and the area below the waterline is not reproduced ・The shelter section is a single-piece part created using a slide mold ★The Chrysanthemum crest features realistic engraving; replacement parts are included ● Deck ・The area from the anchor deck to the gun deck is reproduced as a single piece ・The structure from the aft torpedo tube room to the stern is a single piece 　→ The deck features a camber angle (draft gradient), and the linoleum trim is depicted with delicate engraving 　→ Machine gun ammunition boxes, machine gun turret bluework, and dinghy davits are directly engraved onto the deck 　★ Realistic replacement parts for the dinghy davits are included 　　→ The davits feature detailed reproduction of light indentations (recessed carving) and the shape of the pad sections 　 ・Included boats: 11-meter motorboat, 10-meter cargo boat, and 9-meter cutter 　★ The 11-meter motorboat includes replacement parts designed for easier painting 　　→ The superstructure and rear canvas cover are separate parts 　★The 9-meter cutter includes two-piece parts designed for easier painting 　 ・Depth charge launchers, anti-aircraft guns/additional machine gun mounts, and stern bollards are separate parts from the deck ・Machine gun configurations can be recreated using one of two options based on survey drawings from 1944 and crew testimonies ●Bridge & Funnel ・The bridge base is a box-shaped part molded as a single unit using a slide mold ・Each level?including the compass deck, anti-aircraft command post, and signal flag deck?is composed of separate parts ・The bridge windows are integrated into the compass bridge part (molded in gray) 　→★The 60cm signal searchlight is molded in a transparent part (unlike the standard gray color), allowing for a realistic reproduction ・Detailed fittings such as ladders and signal searchlights are each composed of separate, independent parts ★Binoculars are included to enhance the precision of the anti-aircraft command post ・The Type 21 radar on top of the bridge is supplied as a single part integrating the base and the radar unit 　★The PLUS version includes a realistically shaped radar part (requires modification for installation) ・All three funnel parts feature a left-right split structure ・The tops of the funnels and the rain covers feature a “perforated” design to realistically depict the lattice pattern ●Armament ・The 12.7 cm twin anti-aircraft guns include parts common to the Special Series 　→★Realistic replacement parts are included for the 12.7 cm twin anti-aircraft guns (Type A1) 　→★The guns have a wide elevation range, and two types of gun sight shutters (open/closed) are available 　・The 25mm triple machine gun is included as a single-piece molded part that is easy to assemble and features excellent detailing ・The 25mm single machine gun includes parts common to the Special Series 　→★Realistic replacement parts are included, with the mount and barrel as separate pieces for easy painting 　→★Assembly involves positioning the runners and securing them with flow-in adhesive ●Fittings ・The gangway is a separate part, allowing you to recreate the ship’s appearance while at anchor ★Replacement parts are included for the navigation lights mounted on the port and starboard sides ・The aft mast consists of separate parts for the main mast, strut, and cross tree 　★The PLUS Edition includes a split part that allows you to recreate the extended shape of the topmast ・The searchlight parts are molded in gray 　★The PLUS version includes clear molded parts for added realism ・The Type 13 radar can be optionally mounted (mounting requires modification of the davit) 　★The PLUS version includes a more realistic Type 13 radar part ・The stern signal light is provided as a separate part ●Decals ・One sheet of decals is included ・★Two types of decals, totaling two sheets, are included ・One sheet of decals containing markings such as the naval ensign, national flag, and the Hinomaru for carrier-based aircraft is included 　→Three sizes of the naval ensign, etc., are provided. The decals are scaled to 1/700 scale based on the actual dimensions of 10-ken, 6-ken, and 3-ken 　・ ★ One sheet of decals featuring the stern ship name, white lines for the rear mast, and waterline marks 　→ The stern ship name is available in two versions: gold and solid naval blue [Contents] Runners x22, Assembly Instructions x2, Decals x2 Completed size: approx. 232 x 20 x 43 mm (L x W x H) [Design/Mold Development Timeline] Main body: 2012 2-piece machine gun parts: 2018 Additional equipment parts: 2021 ★The differences between the PLUS version and the Standard (STD) version are as follows: ・Molded colors of searchlights/signal lights ・Addition of binoculars ・Replacement with 2-piece 25mm machine guns (included) ・Replacement of Type 21, Type 13, and Type 22 radar sets ・Replacement of Type A1 anti-aircraft gun ・Replacement of 11-meter motorboat ・Replacement of 9-meter cutter ・Addition of a dinghy rack ・Replacement of the Chrysanthemum crest ・Replacement of the side lights ・Addition of decals for the ship’s name on the stern, etc. (From the Fujimi Models website)