Fujimi 1/700 Wave Series (Snap type) No.6 EX-1 Japanese Aircraft Carrier Shinano Special Edition (with Photo-Etched Parts) japan NEW

A version of the “Shinano” featuring etched parts and a wave base that realistically depicts the ship at sea. [Structure and Specifications] ・Composed of pre-colored parts, allowing you to recreate the intended color scheme without painting. ・Snap-fit assembly allows for construction without the use of glue. ・Includes a water surface base that makes it easy to realistically display the ship as if it were sailing on the open sea. ・Includes etched parts that allow for detailed reproduction down to the finest details?something difficult to achieve with injection-molded parts alone. 【Product Features】 ・Scale: 1/700. ・The model is based on the ship’s appearance at the time of its completion in November 1944, with all remaining construction work finished. ・While the real-life counterparts are the sister ships Yamato and Musashi, this kit features dedicated parts rather than shared components to highlight their differences. ・The display water base realistically depicts the wake generated by the bow, sides, and propellers. Hull ・The hull is split into left and right halves, accurately reproducing the layout around the bow bellmouth based on historical research. ・The molded color is a shade of green mimicking anti-submarine camouflage. ・Some details, such as the canvas covering the openings on the sides, are rendered using high-adhesion decals. ・The portholes lining the sides are reproduced with delicate engraving to distinguish between covered and uncovered versions. Flight Deck ・The flight deck consists of two pieces. The deck is divided into a concrete-paved section and an outer edge, providing the optimal shape for painting. ・The concrete-paved section is a pre-colored part in light gray, which is lighter than standard naval gray. Armament ・The main guns are capable of elevation and traverse. This design achieves both minimal parts and realistic modeling. ・The direction of the 46 cm main gun barrels is set to the open position using a slide mold. ・Dedicated parts are provided for both the main gun turrets and the machine gun mounts to reproduce the added machine gun positions on the No. 2 and No. 3 turrets. ・The secondary guns are capable of traverse and feature a one-piece structure where the barrel and turret are integrated. Bridge ・The bridge utilizes split and sliding molds to minimize part seams, resulting in integrated components. ・The funnel shape and structures near the aft boat deck have been rendered in 3D based on recent reference materials and historical research. Funnel/Mast/Fittings ・The funnel shape and structures near the aft boat deck have been rendered in 3D based on recent reference materials and historical research. ・The funnel consists of three parts, with the steam discharge pipe integrated into the support structure while maintaining a realistic design. ・The cap section (grille) at the top of the funnel is left open, creating a sense of depth and a highly realistic appearance. ・The bridge is molded as a single piece using a slide mold. All four sides feature intricate engravings for a realistic appearance. ・Strip patterns on the high-angle gun mounts and monkey ladders on the hangar walls add detailed engravings to surfaces that might otherwise appear monotonous, achieving a high-density finish. ・As a bonus, adhesive-type “horizontal binoculars” and “machine gun ammunition boxes” are included?parts designed for a detailed finish. Aircraft ・Four types of aircraft are included: the “Shiden-kai,” “Ryusei,” “Saiun,” and “Ouka.” ・The Shiden-kai comes in two color schemes: the standard dark green and a yellow-orange version modeled after the experimental Shiden-kai Type 2. ・The Ryusei, Saiun, and Shiden-kai feature one-piece molded landing gear, and separate parts with more detailed sculpting are also provided. Included Decals ・Pre-cut decals with excellent conformability are included, allowing for easy application of detailed coloring. ・The included decals feature specialized color tones designed to match the cement-coated flight deck. ・The decals include canvas-covered sides, linoleum on the bridge floor, and white flight deck markings, enabling color expression without painting. ・In addition to the stickers, decals featuring flight deck white lines and the Hinomaru flags on the aircraft are included for those who prefer a painted finish. ・The box art is an original illustration by artist Kenji Kurokawa. It depicts the ship sailing at high speed under clear skies. ・The molded parts consist of 7 colors in total. (Kure Naval Arsenal color, hull bottom color, black, dark gray, gold, dark green, clear blue) ・Assembled Dimensions: (Approx.) L 396 × W 134 × H 88 mm (Including display sea base) 【Contents】　・Springs x 27　・Sea Base x 1　・Spacers x 3　・Assembly Instructions x 2　・Color Stickers x 2　・Decal Sheet x 1　 Etching Parts ・Includes etching parts that allow for detailed reproduction of features difficult to achieve with injection-molded parts. ・Etching sheet size: (approx.) 130 × 180 mm; Thickness: (approx.) 0.1 mm ・Etching parts include handrails, ladders, rungs, Type 13 radar, windbreaks, elevators, cranes, funnel caps, and aircraft propellers. No painting required: Each part is pre-colored in its molded color, and some parts use decals to achieve the final color scheme. No glue required: The parts are designed to snap together, allowing for easy assembly. *Information current as of April 2026. Please note that colors may appear different from the actual product due to monitor settings or image resolution. (From the Fujimi Models website)