Fujimi 1/24 Car NEXT Series No.24 Suzuki Jimny Sierra JB74 (Kinetic Yellow) japan NEW

The wide style Jimmy Sierra “JB74” with 1.5L engine is now available in Kinetic Yellow! (Product Features) ・The product is modeled after the JB74W-1-2 JC grade that went on sale in 2018 ・JC grade features exclusive aluminum wheels and mirrors with turn lamps ・Accurate reproduction of every detail due to the unique 1/24 scale size ・Composed of 7 different molding colors （Yellow, Black, Seven colors are available (yellow, black, silver, gunmetallic, clear smoke, clear, and clear red) ・Even when assembled straight, the colored parts give the appearance of being painted ・Parts are divided to greatly reduce masking work even in the case of painting. Body ・Part colors use special molding materials to reproduce a level of gloss that is difficult to achieve with paint ・Body and roof are separate parts, molded and colored in their respective colors ・Body is a box shape using slide molds to accurately reproduce the square style ・Over fenders, a characteristic of the Jimmy Sierra, are separate The over fenders, characteristic of the Jimny Sierra, are separate parts ・Standard structure of the car NEXT series, in which the hood, rear, roof, etc. are stacked and inlaid into the body parts ・Decessed molds such as door panels are expressed in a depth with a lot of depth to support paint smearing ・Over fenders are integrated with the side under garnish, molded color is black ・The front and rear bumpers are molded in the same color as the body parts The front and rear bumpers are wider than those of the Jimny (JB64), and are specially designed for this model. Under-floor ・Ladder frame is a single part for the underbody, and the parts are attached to each other ・Leading arm, trading arm, front and rear differential gear cases and drive shafts are sculpted as separate parts ・Trading arm comes with exclusive parts for Jimny Sierra. ・The undercarriage shape is sculpted based on the motif of the 4AT model Window ・Driver's/passenger window is designed with separate glass and frame, no need for sticker coloring or masking when painting ・Rear window (side/rear) is exclusively molded in smoke color to express the color difference from the front side ・Defogger on the rear glass is expressed with delicate sculpture ・Wiper arm/blade has a realistic look The wiper arm/blade is a fine molded part with a realistic appearance, and the concave shape of the blade surface is also expressed by fine sculpture. Interior ・Handle and instrument panel are exclusive parts reproducing the features of JC ・Cruise control/audio switch is expressed by delicate sculpture on the handle ・Two-piece seat structure to reproduce both seat side and back shape, rear seat headrest is reproduced in lower position ・Rear luggage box lid Reproduce the split pattern on the rear luggage box lid Equipment ・The headlight uses the shape of the LED light type equipped only with JC as a dedicated part ・The headlight washer is omitted due to the convenience of the mold) ・Side mirror reproduces the shape dedicated to JC of the embedded turn light type ・Aluminum wheels dedicated to JC grade are adopted, the gunmetalic The tires are molded rubbery resin and dedicated mold is used, on-road tires of size 195/80R15 are included ・The spare tire on the back is made of the same rubber material as the four wheels ・The rear lights are reproduced by stacking molded color parts of clear red and clear, two-color light lens ・The lights are reproduced by stacking molded color parts of clear red and clear, the reflector's curved surface and bulbs are also sculpted in detail. Lamps are sculpted to reproduce the reflectors' curved surfaces and bulbs in detail. Color stickers ・Added stickers reproduce detailed coloring and are pre-cut for easy application. ・Stickers include meter panel, logo, vehicle number, etc. ・Spare tire half-cover decals of “4WD” and “Jimmy” are included. Size when completed is (approx.) 150mm (L) x 79mm (W) x 76mm (H) [Contents] ・Runner x17 ・Rubber material tires x5 ・Instruction manual for assembly x1 ・Seal x2 (Structure and specification features) ・Pre-colored parts are used to reproduce the coloring without painting. ・Snap-fit assembly allows for assembly without the use of adhesives. Please note that colors may look different from the actual product due to monitor and image resolution issues. (From Fujimi Models website)