GodHand Airsoft Gun Maintenance Tool Set japan NEW

Modeling/assist modeling tools . Each tool is specially designed to fit the screws used for Tokyo Marui airsoft guns! For maintenance and removal of optional parts! ●Take-up cloth case (with pile and hook surface) - L-shaped slim bit handle - Minus bit small (magnetic) - Minus bit small (magnetic) - Minus bit small (magnetic) - Minus bit small (magnetic) - Minus bit small (magnetic) - Minus bit small (magnetic) - Minus bit small (magnetic) - Minus bit small (magnetic) - Minus bit small (magnetic) Minus Bit Small Size (Magnetic) ? Minus Bit Large (Magnetic) ? Double-headed Plus Bit (Magnetic) ? Coin Bit ?Hex Wrench (3mm, 2mm) Hex Wrench (3mm, 2.5mm, 2mm, 1.5mm) *Only the 3mm hex wrench has a ball point specification ▼Quality Indication ●Winding type cloth case (with pile and hook) Made in Japan (Made in Japan/Niigata Prefecture, Tsubame-Sanjo) ●Material: No. 8 water-repellent canvas ●Embroidery: Acrylic tape 1×22 ●Sewn thread: Gunze polyester 30 ●Fittings: Black nickel double-sided clasps. L-shaped slim bit handle Made in Japan (Made in Japan/Niigata Prefecture Tsubame-Sanjo) ●Bits are inserted into the handle at both ends (H6.35mm) ●Material: Special alloy steel (CRV), elastomer (TPE) ●Surface treatment: Nickel plating Minus Bits (Small)? ● Minus Bits (Large)? Minus Bit (Large) ? Double-headed Plus Bit ? Coin Bits Made in Japan (Made in Japan/Niigata Prefecture Tsubame-Sanjo) ●Material: Special alloy steel (CRV) ●Magnetic (minus bit, plus bit) ●Insertion angle 6.35mm (1/4) ●Hardness: HRC58～60(?????) , HRC 59-61 (?) Surface treatment: Parker (phosphate coating) - Hex wrench (3mm, 2.5mm, 2mm, 1.5mm)Made in Japan (Made in Japan / Tsubame-Sanjo, Niigata Prefecture) Hex Wrench (3mm, 2.5mm, 2mm, 1.5mm)Made in Japan (Made in Japan/Niigata-ken Tsubame-Sanjo) ●Material: Special alloy steel (Va・SNCM) ●Hardness : HRC 54～62 ●Heat treatment : Completely non-oxidation, decarburization correction hardening method ●Surface treatment : Hard chrome plating (surface hardness H.V980 or higher) ★Cautions for care★ ・When the tool is left wet or covered with soil, rust may occur. Please clean and store. When using the tool, the tool itself or the screw may be scratched or the paint may come off. Thank you for your understanding in advance. If the cloth case is left wet for a long time, it may lose its color. After washing, shape it and hang it out to dry immediately. Due to the nature of the material, when it is damp from sweat or rain, the color may fade and transfer to other clothing due to friction. Do not disassemble the airsoft gun or the optional parts that are not explained in the manual. Loose screws can only be tightened with screws that can be accessed by "disassembling or removing parts as described in the instructions provided with the airsoft gun". (The "Parts List" in the instruction manual is not an explanation of how to disassemble the unit.) ● Never turn the screws in the direction of loosening (counterclockwise) when tightening them. Loosening or removing the screws may lead to a variety of problems. For screws that have been coated with an anti-loosening agent, once loosened, the anti-loosening agent will come off. In the screw used for the airsoft gun, there is a thing which becomes easy to loosen when it is removed once, and the knack is necessary to screw in the removed screw again. (From the Godhand website)