HI Q PARTS WONDER VISE (SMALL VISE FOR MODELS) 1 PIECE japan NEW

For modeling / modeling aid tool, etc. Made in Japan, metal, etc. Holds parts to help with crafting, also looks good when shooting with a camera! Mini vise for modeling to hold small parts. It can be used as an aid for crafting and gluing parts, and also as a base when shooting with a camera. The notch for fixing very small parts can be used to hold cylinders and wires with a diameter of 0.4 mm vertically, and is recommended when machining the tip. The concave part is for fixing small parts with a short side of 17 mm or less, and the flat part is for fixing small parts with a short side of 10 mm or less. The luxurious knurled knob design allows you to feel the opening and closing directly on your fingers. What is it useful for? For holding small parts that are difficult to hold by hand" "When you want to process the tip of a thin cylindrical part" "Use it when photographing small objects to enhance their appearance!" Recommended size for fixing: - Concave groove part: 6.0mm to 17mm in short side - Flat part: 0.1mm to 10mm in short side - △ notch part: Cylinder (0.6mm to 2.5mm in diameter) *This can fix thin wire perpendicular to the vise. *If a heavy object, an object with unstable weight balance, or an object taller than 10cm is placed between the vise and the wire, it may fall over. Please be careful. *This is a machined product with an emphasis on precision, so there may be machining marks, stains, or scratches on the surface. Please understand this beforehand. Size (including protruding parts) W20mm D45mm H20mm Country of Origin/Japan