HI Q PARTS Magnet Setter 2 For 5.0mm Magnets (1pc.)

[Size] Sheet: 49 mm wide, 40 mm deep, 0.2 mm thick, sticker (1 sheet): 4.9 mm in diameter, 0.2 mm thick A must-have product for magnet detachable crafts that becomes a magnet receptacle just by sticking it on! Magnet Setter 2 is a magnetic seal that can be used as a receptacle for neodymium magnets. The soft material fits even on curved surfaces and is only about 0.2 mm thick, making it possible to create a magnet holder even for parts with a small thickness that are difficult to embed a magnet in. Cautions for circular cut type Due to the punching process, it is slightly curved in an arch shape. When attaching, press well to adhere the center of the magnet. Pressing with a round part, such as the back end of a ballpoint pen, will help it adhere well. Caution Smudging with a solvent using enamel paint for models may reduce the adhesive strength. Do not soak the product in solvent for a long period of time. If adhesive strength is insufficient, use instant adhesive or epoxy clear adhesive to reinforce the adhesive. Since the product is cut from metal, please be very careful not to injure your fingers or other parts of the product on the edge surface.