HI Q PARTSSpray Head for DP Bottles (1pcs)

A handy tool for quickly spraying small amounts of solvent Designed for heavy airbrush users This trigger-style spray head is compatible with model-making solvents. It is used by replacing the cap on a DP Bottle JPS. It is ideal for adding small amounts of solvent to an airbrush cup or for pouring small amounts of solvent when cleaning the airbrush cup. Compared to using a dropper to draw up solvent, this reduces the effort required for the task. Please read and follow the instructions in the included manual carefully before use. Note 1 Important) When transferring liquids, we recommend using a filter (such as a strainer or filter paper) designed for paint. Please be careful, as foreign matter such as dust or lint can cause malfunctions. ● Water ● Solvents for model lacquer paints ● Model tool cleaners ● Solvents for water-based acrylic paints ● Alcohol-based solvents for models ● Solvents for model enamel paints are compatible. Solvents other than those listed above may also be used if the original container is made of PE (polyethylene). Some highly volatile solvents may cause malfunctions. If you notice any abnormalities, please discontinue use. Liquids originally contained in metal containers are generally not compatible. (Metal cans are sometimes used due to concerns about evaporation and to ensure airtightness.) *Reference for organic solvent resistance: “Polymer Dictionary (10th Revised Edition)” published by Taiseisha Note 2 Compatible with DP Bottle JPS Series 50ml, 130ml, and 200ml models. The tube must be cut to fit the size of the bottle being used. Please cut the tube according to the instructions included in the package. Do not transfer the tube to other bottles for use. Unit Dimensions: Width approx. 28 mm, Depth approx. 52 mm, Height approx. 233 mm Dispensing volume per press: approx. 0.3 ml The design of the packaging materials is subject to change without notice. We appreciate your understanding.