Kotobukiya 1/24 Hexa Gear Block Base 04 DX Arsenal Grid (Crane) japan NEW

Detail up parts (SF)
Experienced governor! Build a garage Seyo! !!

Hexa Gear block base crane is now available! !!
It consists of three units, a "crane unit", a "garda unit", and a "running rail unit". By combining it with the included two types of 75mm x 150mm base plates for floor and wall, this kit alone can be used as a crane. You can immediately create a base or factory using the crane and play with it.

Product specifications
■ The "winding machine" of the crane unit uses a real metal chain.
It is possible to raise and lower the suspended object using the attached rod.
■ The crane unit can be moved vertically and horizontally by the girder unit and the traveling rail unit.
The girder unit and running rail unit can be connected and extended, and can correspond to the size of the block base made by the user.
■ Use hooks and eyebolts (hanging rings) to connect the crane to the object.
Connect the 3mm shaft of the eyebolt to the object, hook the hook, and hang the hook string on the crane.
■ By using the 3mm hole in the crane unit, it can be used as a single crane part and can be used for heavy machinery.
* The load capacity of the crane is assumed for the entire Hexa Gear series.
■ Floor and wall sizes are standardized to 75 mm x 150 mm, respectively.
The floor and walls can be rearranged horizontally and vertically to enjoy the stage according to your favorite situation.
■ You can freely build floors and walls using 4 types of attachments, and if you use more than one, you can build barricades, hierarchical structures, and mezzanines.
■ Various scenes can be produced in combination with the separately sold DX head quarter, panel option A, and lift option A.

accessories
■ Crane unit x 1
■ Gada unit x 1 set
■ Travel rail unit x 1 set
■ Rod x 1
■ Hook x 6
■ Eyebolt x 6
■ Hexagram for eyebolts x 6
■ Hexagram x 16
■ String x 3
■ Floor panel x 4
■ Wall panel x 14
■ Joint A x 60
■ Joint B x 60
■ Joint C × 84
■ Joint D × 84

(C) KOTOBUKIYA
-----

the work
Hexa gear

series
Kit block

scale
1/24

Product size
Overall length about 150 x 75 mm (1 panel)

Product Specifications
Plastic model

Number of parts
201-400

Material
ABS / PE / Copper / Nylon

design
KOTOBUKIYA, Yuichi Kuwamura

* The image is a prototype. It may be slightly different from the actual product. It is also painted for shooting.

(Kotobukiya from his website)