Kotobukiya M.S.G Mecha Supply 09 EX Armor C

Detail up parts (SF) Square horn silhouette is added to additional armor which was eagerly appreciated by users.
Concept is a simple "Reactive Armor (Explosive Armor)", combining "Armored Plate" and "Connected Expansion Attachment" and attaching to 3 mm hard points of various plastic models such as "Frame Arms" and "Hexagia" It is specification.
A 3 mm hole is set on the back of the armor board, and the expandability is also outstanding.
Aside from the armor plate "smoked discharger" and 2 kinds of "hook" optimum for mechatronic sense overflowing mechanism are attached, it is possible to easily detail up.

gimmick
■ Three kinds of armor boards with different details were prepared.
In addition to direct mounting using the 3 mm hole on the back side, it is possible to use it freely expanded using an attachment that connects armor's borders.

■ Armored board connection attachment also has multiple shapes, basic on concave type, 3mm shaft and 3mm hole on the reverse side, flat objects etc on the back side.
Since it is a specification to connect the armor board's feet with a concave attachment, it can be used in various ways depending on the idea, such as partially staggered attachment.

■ Because the three cylinders of the smoke dis - charger can move independently, they can be installed at a free angle.

■ There are two kinds of hook parts, and it can be used according to situations and images.

accessories
Armor plate A × 8
■ Armor plate B × 8
Armor plate C × 8
■ Connected Expansion Attachment A (3 mm hole) x 12
■ Connected Expansion Attachment B (3 mm axis) x 16
■ Connected Expansion Attachment C (Flat) x 32
■ Connected Expansion Attachment D (Flat) x 4
■ Connected Expansion Attachment E (with Angle) × 4
■ 3 mm convex shaft joint × 2
■ 2 movable joints
■ Smoke Discharger × 2
■ Hook A × 2
■ Hook B × 2