Plamo Improvement Commision Hobby Work Station (Basic) japan NEW

Modeling/assistive modeling tools This is a workstation to avoid contaminating the work space with chips generated during model making. A metal net is placed on the upper surface of the main body, and work such as gate-cutting and filing can be done on the net, so that the surrounding area is not dirty and the garbage disposal can be done easily afterwards. This is a new friend of model making, where you can work quickly when you feel like it, and when you're done, you can quickly put it away, and the place you bring it in will be turned into a work space. Size. Approx. 297mm x 209mm x 30mm (when stored) Accessories Metal stay for tray interior x 2 Special Cutter Mat Nipper Holder Material. Main body : ABS Working Plate: Steel Working part metal stay: Steel Simple, compact and convenient work table ] A compact body full of useful features! It plays an active role in various scenes of model making. It is useful not only for basic cutting and cutting work, but also for assembly and other work. If you work on the workstation, it is easy to clean up because there is no trash around it. Even if a small part is dropped while working, it falls into the tray inside, reducing the risk of losing the part. [ Operation Department ] The working part of the main body is made of thick and strong metal plate with numerous holes in it. The diameter of the hole is set so that it is difficult for scraps to fall off and parts to fall off. Large shavings that cannot be dropped from the hole can be dropped from the notch on the front side of the main body. In addition to cutting scraps, we can also drop small-sized items such as used sandpaper. The plate alone is strong enough, but if you need to work with more force, such as cutting through parts, you can increase the strength by attaching the metal stays that come with the plate. The metal plate is easily removable, making it easy to clean up the fine shavings and other debris that have accumulated in the corners. Pull-out trays for trash disposal]. Working on top of the workstation makes it easy to clean up because there's no clutter around it. On this, it can be used for cutting, shaving, etc., as well as assembly, etc. Even if a part is dropped during operation, it falls into the tray inside, reducing the risk of losing the part. Trays for cutting scraps can be pulled out and easily discarded when they accumulate. The tray has plenty of space so you can concentrate on your work and reduce the number of times you have to dispose of your waste. Convenient and easy to read text stand] The lid can be used as a stand for instructions, so you can use more space in your work area and be more space efficient. The stand is angled to the perfect angle for hanging instructions and can accommodate even thicker objects. The bottom of the instruction manual can be held by inserting it, so even if the manual is in book form, you can hang it up with the page open. A special cutter mat that fits perfectly ] The included special cutter mats are available in two different colors on both sides. The width is just right for the wire mesh part of the workstation, so it is difficult to shift during work and can be used stably. The green side can be used for gluing and cutting parts, while the black side can be used for cutting masking tape or decals. Of course, it can also be removed and used as a stand-alone item. Its compact size makes it convenient for a little work on the tabletop. [ Nipper Holder ] Includes a stand for nippers, which are often lost in other tools and parts while working. By using the stand, the possibility of hitting the cutting edge is reduced and the nipper blade part is protected. In addition, the possibility of getting injured by putting your hand on the edge of the blade is also reduced, and you can enjoy model making more safely. Close the lid and it's compact! ] The lid can be closed for compact storage. With a flat top, yo