Plamo Improvement Commission DECALING QUICK TRAY japan NEW

For modeling / modeling aids, etc. Decaling Quick Tray is a decal tray specialized for processing large quantities of decals at a time. It can handle a wide variety of decals and situations, including not only general decals, but also the small size caution decals that have recently become popular and are often used on character models and scale models. Greatly reduce the time required to apply water-transfer decals! The Decaling Quick Tray is an item that greatly reduces decal work problems and time! By soaking multiple decals in water and then pulling up the sponge plate, you can apply decals one after another with the decals resting on the sponge plate, making your work much easier. The moisture in the special sponge prevents the decals from drying out for a long time, while minimizing the loss of adhesive power, thus reducing the number of mistakes. If several dozen decals are to be worked on at the same time, adhesive strength can be maintained for 20 to 30 minutes in the pulled-up state. *The maximum size of decals that can be used with the decal tray is approximately 60x70mm. *If you are unsure about the adhesion, please use a decal adhesive or softener in combination with the decal tray. Moisture from the sponge permeates into the backing paper, keeping the backing paper moist and the glue portion in reduced contact with the moisture, keeping the adhesive strong. This makes it possible to process multiple decals at the same time over an extended period of time. Tray with many useful gimmicks The tray is equipped with many convenient gimmicks for work, such as a specially designed sponge plate, a space to dispose of the remaining base paper after application, a non-slip surface to prevent water spillage, and a hook for storing tweezers. The sponge tray is integrated with the tray (main body), so it can be easily lifted out simply by sliding it. There are many gimmicks to make it easy to use, such as a space for collecting decal bases and other waste, and a hook for storing the included tweezers. Tweezers specialized for decal work The included resin tweezers are designed specifically for decal application, with a wide tip to easily grip decals, and the resin material eliminates the possibility of damaging or tearing decals. Curved scissors for cutting even small decals with ease Curved scissors are convenient for cutting out decals. The curved blade and compact tip allow for a small turn when cutting out densely packed decals, making it easier to cut small decals. How to use (1) With the sponge tray pulled up, place the sponge on the sponge tray and attach the top cover. 2) Lower the sponge tray and fill the sponge with water or lukewarm water up to the line on the inside of the tray (body) until the water is completely absorbed. Please pull up the sponge tray from time to time to check if the water has been absorbed. (3) Gently place the required amount of decals on the sponge tray and leave for a few seconds to a few dozen seconds. The time will vary depending on the size and type of decal used. ④Please move the sponge tray up and use the included tweezers to apply the decals. ◎You can work continuously with multiple decals on the sponge. Care Instructions ◎Tray (main body) Please dispose of the base paper and water in the waste container, rinse lightly, and then wipe dry. ◎Sponge Remove the sponge from the tray and run it under water while wringing it out, then dry it and store it. Storing the sponge in a wet condition may cause mold, etc. When the sponge dries, it will become smaller than its original size and bent in shape, but this does not mean it is defective. ◎Tweezers Please rinse the sponge lightly and wipe it dry. Please rinse them lightly and then wipe them dry. When storing the tweezers in the tray, please keep the horizontal bar of the tweezers facing down. Product Specifications ◆Size Decal tray: approx. 80mm x 177mm x 32mm Tweezers: approx. 13mm x 73mm x 7mm Curved scissors: approx. 65mm x 142mm x 10mm Accessories Resin tweezers Curved scissors ◆Materials Decal tray, tweezers: ABS Sponge: PVA sponge (From the website of Plastic Model Improvement Committee)