Plamo Improvement Commission MASTE SLICER V japan NEW

Knives, cutters, etc. Say goodbye to troublesome masking tape cutting. Masking is necessary to neatly separate the colors of assembled plastic models, but it takes a lot of time and effort to cut a large amount of masking tape to fill in long, thin lines, complicated patterns, and gaps between curves. The Masteki Slicer V is a compact cutter that utilizes the replacement blade (6 mm wide) of a commercially available design knife to make multiple thin strips of masking tape at the same time with up to five blades. By using the included cutter mat with slider, you can easily cut out large quantities of masking tape without making it dirty. Features. ■Makes a lot of fine-cut masking tape at once, according to the part to be affixed! By setting a commercially available replacement blade (sold separately) for a design knife with a blade width of 6 mm at the same time, multiple fine-cut tapes can be made at one time. The number of blades can be changed up to a maximum of 5, making it possible to create tapes with a minimum width of 1 mm and a maximum width of 4 mm. When two replacement blades are used, curved masking tape and plastic plates can also be cut out. It is also compatible with hologram sheets and colored cutting sheets, so you can enjoy more fun with unpainted decorations. *Please use masking tape with a width of 10 mm or more for the masking tape to be cut. *The maximum length of each narrow slice is approximately 8 cm. *This product is only compatible with masking tape and plastic boards with a thickness of 0.3 mm or less. ■Make fine masking tape easily! Using the included cutter mat with slider, you can cut the shredded tape vertically to create many fine masking tapes at once to meet your needs. You can create masking tapes as small as 1mm x 1mm, so precise masking is possible, such as a gap aid for curve masking, digital camouflage, etc. It is possible to create masking tapes as small as 1mm x 1mm. ■Specifically configured fine cutter! The cutter is designed with a grip that fits in the palm of the hand and can be held stably, making it easy to apply force to the cutting edge. The end tip is designed with a special shape that allows you to cut masking tape cleanly at an optimal angle when the cutter is held close to the floor surface. The distance between the blades is fixed by the metal blade of the mounting section, so the distance between the blades is not easily blurred and a constant width can be cut cleanly. After use, the dedicated protective cap can be tightened for safe storage. ■Exclusive cutter mat to improve work efficiency! The size is specially designed for the area where masking tape is cut out, so it is compact and takes up little space. To make fine masking tapes, cut fine masking tapes vertically while moving the slider for vertical cutting horizontally. The cut masking tape can be removed from the cutter mat and immediately ready for the next masking job. There are a total of four places to cut the masking tape (front and back, top and bottom), so if the area to be cut becomes damaged, the cutter mat can be flipped upside down or inside out for longer use. Product Specifications ◆Size Special cutter: approx. 120 x 20 x 15 mm Cutter mat with slider: approx. 112 x 61 x 10 mm Cutter mat with slider: approx. 112 x 61 x 10 mm Accessories Dedicated cutter x 1 Cutter mat with slider x 1 Precautions] ●This product does not come with a blade. This product does not come with a blade. Please purchase a replacement blade for the design knife (sold separately) and use it. When using this product, please handle the blade with care. Please use masking tape with a width of 10 mm or more. Please select and use a blade with a length as close as possible, since the length of the blade varies. When this product is not in use, be sure to keep the lid on the product. Please keep the product out of the reach of small children. Please avoid using or storing the product in a high temperature or humid environment. Please avoid using and storing the product in high temperature and high humidity environments.