Tamiya 1/10 RC M-07 CONCEPT CHASSIS KIT japan NEW

It is an assembly kit of radio controlled racing car.

Total length = 332 mm Picture is the assembled kit

【Compact chassis kit pursuing maneuverability and running fun】
M-07 CONCEPT is a compact chassis pursuing light driving performance and controllability unique to front-wheel drive and sticking to maintainability.
The main frame secures rigidity as a monocoque type of upper and lower division that combines a resin lower deck and an upper frame.
Moreover, the replacement of the differential gear reduces disassembly parts around the foot as much as possible, and it is accessible from the bottom and maintainability is also good.
Suspension is independent of the double wishbone equipped with CVA oil damper.
Designed exclusively for long arm and linkage, it is also characterized by a wide setting width.
In addition, we realized a drive system without loss such as full bearings specification, oil sealed type gear differential and universal shaft.
Two types of wheel base can be selected, 239 mm and 225 mm.
I am looking forward to choosing a rich body for M chassis.

[Main equipment parts]
● Monocoque type frame of upper and lower split type
● Long suspension arm with wide setting width
● CVA oil damper
● Full bearing specification
● Oil enclosed type gear differential
● Universal shaft
● High Torque Servo Saber

Suspension arm and linkage are set as long as possible and the lever ratio of the damper is optimized.
Camber adjustment is also OK.

Tow-in adjustment is possible by washer setting of rear suspension mount.

Easy access to the replacement of the differential gear from the bottom.

In addition to the oil-filled geardef, the universal shaft etc. are also standard equipment.

【Basic Specification】
Chassis length 332 mm (including bumper)
Chassis width 164 mm
Two types of wheel base 239 mm, 225 mm can be selected
● Frame = Monocoque type with upper and lower split type
● Drive system = front midship motor ・ front wheel drive
● differential gear = oil enclosed type gear differential
● Steering = 3 tie rod type
● Suspension = 4 Wheel Double Wishbone
● Damper = CVA oil damper
9 types of gear ratio = 7.22: 1 to 4.81: 1 (5.78: 1 when using the 20T pinion included in the kit)
● Speed ??controller = ESC specification (sold separately)

【What you need separately】
● M body for chassis
● 540 type motor
● Tire
● RC Mechanical: Ekusekku GT-I 2.4G (set for electric R / C car)
● Batteries for running, chargers
● Power supply for transmitter

(From Tamiya website)