Tamiya CHAIN-PROGRAM ROBOT WORKING SET japan NEW

Craft / experiment kit [Let's program movements by connecting pieces together! 】 It is an assembling kit of a robotic work that can program motion by joining together frames that make three kinds of movements, forward, right curved, left curved like a chain. Curve Setting the chain to the robot rear of jack, internal gear by moving the chain read the piece to mechanical, advanced front tire, the left and right by changing the orientation with rear tire. When the front tire is rotated, in conjunction with each other to swing left and right arms and head, it is born pretty movement like look around while walking cheerfully. In addition, the advancing frame advances by about 15 cm in one, the curve frame turns about 30 ° in each direction. Frames have 32 forwards and 64 left and right curves, each of which is 16 in total. Approximately 3 to 20 frames are used for the program. Furthermore, if you connect the frame like a circle, you can move the programmed pattern repeatedly, in that case 20 to 40 frames are a guide. If it is a wide and flat place where the chain will not get caught, you can connect the chain for even longer to make a magnificent adventure. Since I can try countless combinations, I'm looking forward to make a course and challenge to move according to the course with the program I set. 【Challenge to upgrade by adding parts and board】 Such as a Universal arm or plate (sold separately) to the robot body, also remodeling since the 3mm hole corresponding to the attachment has been opened a lot of rich uniform various machine tool parts OK. Attach the universal plate to the inside of the robot, or to increase the power by adding a gear box, or control directly to prepare a 2ch remote control, possibility ingenuity is infinite. Furthermore, by incorporating commercially available microcomputer boards and boards, it is possible to develop from a mechanical program to a computer program. 【Basic Specification】 ● Total length of about 185 mm at completion, about 138 mm in total width, about 162 mm in total height ● With 2 motors ● All necessary parts are set and completed with only screwing and fitting.