TAMIYA Sound sensor walking robot production set japan NEW

Craft / experiment kit
【Controlling movement of robot by sound】
● Robotics with sound sensors that can control the movement of start and stop by sound
It is a work kit. The parts that can be assembled by selecting one of the above three types of robots is called
I did it.
【Adopt push rivet assembled by fitting alone】
● Sound sensor unit, dedicated motor with condenser, assembled gearbox,
Universal arm, universal plate etc used to cut to the required length
. Using the push rivet which can be fixed only by inserting in each part installation, feel free
You can work on it.
● Built-in sensor to sense sound
Turn on the power switch of the sound sensor unit, move your hand when you touch the hand or call out
Then stop doing the same thing again. Green LED of the sound sensor unit during operation
It lights up and blinks when the battery is low. In addition, sensitivity to react with sensitivity adjustment volume
You can adjust.
● Biped walking ~ Walking with a little head-to-head style ~
It is a biped walking type robot walking with two legs alternately leading forward. The number of parts is small
There are cutting out large parts and bending metal parts, etc. It is a bit difficult work
.
■ Quadruped Walking - Dog type robot walking quietly with sponge shoes on the tip of the feet ~
It is a quadruped walking robot. Grip parts to soften the shock at the tip of the foot attached
It's hard to slip and the walking sound is quiet as well. Partial cutout is few, gently assembled
It is a work to be done.
In case
■ 6 legged walking ~ 6 legs to move and walk like an insect ~
Observing the movement of six legs is also an interesting six-legged walking robot. Part extraction
Although it is slightly larger, it is not so difficult work to pay attention to the combination of feet.