News
From FFVII REMAKE, the action figure of the character appeared in "PLAY ARTS Kai"
What is Play Arts KAI?
This is an action figure series released by Square Enix. Since the release of the first "FULLMETAL ALCHEMIST" in October 2009, more than 100 characters have been sold to date.
A variety of new lineups are scheduled to appear in the future. The size is 8 inches to 11 inches, and among the action figures, has become a large size, and
While the detailed painting and other details have been carefully sculpted, the figure has a wide range of posability, allowing you to recreate a variety of scenes.
New face from FFVII remake
Square Enix started to accept reservations of 'Cloud Strife Version 2' and 'Barrett Wallace Version 2', 'Tifa Lockhart' and 'Aeris Gainsbourg' from action figure 'Final Fantasy VII Remake PLAY ARTS Kai' series on April 10.
They will be priced at 16,280 yen (including tax) each, and will be released on July 18 for Cloud, September 30 for Barrett, October 17 for Tifa, and November 14 for Aeris.
Final Fantasy VII Remake PLAY ARTS Kai: Cloud Strife Version 2
Final Fantasy VII Remake PLAY ARTS Kai: Barret Wallace Version 2
Final Fantasy VII Remake PLAY ARTS Kai: Aerith Gainsborough
Final Fantasy VII Remake PLAY ARTS Kai: Tifa Lockhart
Notice regarding impact due to COVID-19 Apr09 update
Notice customs closed or delay
Due to the spread of COVID-19, shipments to certain countries/regions are currently restricted. Furthermore, shipping delays are also expected due to decreased transportation capacity.
Also, Customs of many countries are closing completely
prease refer to Japan Post recent update (English).
About " Which ? "
about "Which?".
If you're an avid figure fan, you're probably familiar with Hiroki Hayashi.
The master piece of figures of the Masinen Krieger series from Brickworks, as well as,
You can find his work at his own brand, Atelier It.
Here is a new brand to his collection!
Brand name: Which?
The incomparable molding ability of Hiroki Hayashi is gathered into a fetishistic work that has become more acute.
Please enjoy the beauty of its divine formations!
Which-01
First of all, which-01 is a maid who embodies Japanese kawaii.
The coquettish posing of this work is very attractive.
The splits are as easy to apply as possible, and masking is hardly necessary.
Which-02
Part 2, WHICH-02, is a cool beauty queen.
It's a pretty provocative molding.
The sharpness and fetishism is wonderful.
I can't help but be excited about the future of this new brand.
What direction will this brand go in as it pursues its own beauty?
You can't even speak to my eyes, right ?
The impact of COVID-19
Impact on delivery
They are accepting applications for e-packets and EMS for now, but there are some delays.
Thank you very much for your understanding.
WAVE 1/20 POWERED SUIT from starship troopers !!
What is starship troopers ?
Starship Troopers is a space war-themed science fiction novel by American science fiction author Robert A. Heinlein, winner of the 1960 Hugo Award.
Maybe you've seen it in a Hollywood movie.
It is a great work of science fiction history.
What is powered suit Nue ver. ?
This product is a three-dimensional version of [Studio Nue].
Studio Nue Inc. is a planning and production studio based in Shimoshigamii, Nerima-ku, Tokyo, Japan, mainly focusing on science fiction works.
It was designed by Naoyuki Katoh, one of the founders of Studio Nue Inc.
At first, he thought it would be a shame that the back cover of Nue's parent company, SF Central Art's doujinshi, Crystal, was always white, so he thought of making up an ad for a fictional SF magazine.
He thought of the powered suit commentary in STARSHIP TROOPERS as a fictional advertisement for it.
It was then that the "Nue" version of the powered suit was designed for the first time.
Later, he heard that a new book from Hayakawa Shobo, "Space Warriors," was going to be published in the paperback, so he asked to draw it for him. Moreover, I thought that there was room for improvement in the design, and requested the refinement to Kazutaka Miyatake who belonged to "Nue" as well.
This is its cover.
This is how the "Nue" version of the powered suit was born.
about this kit,WAVE 1/20 POWERED SUIT
It was previously released in 1/12 scale, but it is now available again in 1/20 scale with the main focus on ease of assembly and ease of use.
The designer Naoyuki Kato re-examined the structure of the shoulder part, balance, etc. to assemble the previous plastic model many times. The 2019 edition of Mobile Infantry reflects this, and is finished in such a way.
There will be many fans who have been looking forward to it.
Because this product can be displayed side by side with Ma.k!
You can see the product page here, and since WAVE products often take a while to resell, we recommend you buy 2-3 pieces, including stock. 3 pieces is a small packet bonus, so you can save on shipping costs.
3 recommended nippers for Gunpla biginners and How to use them
Cut with plastic nipper!！
Plastic model nippers are made for cutting plastic, so they have a flat cutting surface.
The blade is also thin, so it is easy to get into a fine gap.
Normal nippers sold at home centers are designed to cut metal wires, so the blade is thick and the cutting surface is not as flat as it is for models.
However, plastic model nippers have thin blades and are easy to chip, so please handle them carefully.
3 Recommended Nippers
Tamiya 74093 Modeler's Nipper Alpha
-Sharpness :★★★☆☆
-Durability :★★★★★
-cost performancey:★★★☆☆
This is an introductory nipper.
It's perfect for kids who want to build their first Gunpla plastic models or mini 4WD.
Simple, lightweight, and inexpensive, it's also a good first one for those who aren't used to handling these tools.
Needless to say, the gate marks were also cut cleanly, and the level of perfection was increased just by using the nippers.
TAMIYA Side Cutter for Plastic
-Sharpness :★★★★☆
-Durability :★★★★☆
-cost performancey:★★★★☆
Isn't it probably the nipper with the most users in the plastic model world regardless of the genre?
The thin blade can penetrate even small gaps, and the sharp edge of the blade is impeccable.
The grip and crossings are solidly built and durable.
If you can't get enough of this, I think you should buy a more upscale one.
GOD HAND Ultimate Nipper 5.0
-Sharpness :★★★★★
-Durability :★★☆☆☆
-cost performancey:★★★☆☆
It is a famous nipper in the Gunpla world, which is touted as the "ultimate sharpness".
Other nippers are double-edged, but this one has an ultra-fine single blade.
The person who purchased it said, "The world has changed! How about the step up for those who are not satisfied with thin blade nippers?
However, since it is a thin blade, the blade is often chipped, so you have to handle it carefully.
Also, due to the artisanal finishing process, the number of arrivals and the production itself is very little.
Correct use of the nippers: double slicing
When separating a part from a runner in Gumpra plastic model, I use the usage called cutting twice.
By cutting twice, the excess force is not transmitted to the parts, preventing whitening trouble, and burrs are less likely to remain.
How to cut twice?
(1) Cut the first time at a distance.
(2) Second time, put the back straight to the parts and cut.
When cutting, insert the blade from the thinner side of the gate cross-section to separate it.
conclusion
Nippers are the first tool required for making plastic models.
Depending on your production style and understanding of the tools, it is best to choose the most cost-effective one.
With less trouble, you can enjoy your hobbies stress-free.
Painted with Gundam markers! how to use it and what the point is!
Have you used "Gundam Marker" ? very convenient touch up for small tips part. It makes your model more real.
By assembling the molded parts and applying the included stickers, you can almost recreate the colors from the play, which is one of the attractions of this Gundam model kit.
It looks cool as is, but by adding a little bit of care to the details such as weapons, joints, and molds (grooves), it can be made into a cool and realistic Gundam model kit.
In this article, I will introduce the points and tips about how to paint using "Gundam Marker", which can be easily and beautifully done even by painting beginners, with photos of the actual painting.
1.Upgrade your Gunpla! Let's talk about partial painting!
Partial painting is the process of painting detailed parts, such as weapons and joints, that are not completely color-coded, into realistic colors. The parts, such as weapons and joints, are basically a single gray color. This is because they are often grouped together in a single, monochromatic runner. Even though it is still gray, the joints and other parts are not so noticeable once they are assembled.
For example, the cylinder part of the ankle. Although the parts are often hidden, painting them in gold and silver gives them a mechanic look and a more realistic atmosphere than if they were only gray. In other words, just by adding a little color coding, you can easily increase the number of Gundam models to one rack.
For partial painting, a pen-type paint called "Gundam Marker" is recommended. It can be used in the same way as a pen, so it is easy to handle and can be used for partial painting.
******************************************************************************************************************************
2.How to use Gundam Markers
Step 1: Shake the pen about 50 times with the lid tightly closed.
When using a Gundam marker, make sure that the lid is tightly closed and shake it about 50 times before using it. This is because in some cases the paint inside may have separated when unused or not used for a while. If you use the product without shaking and stirring it thoroughly, only the supernatant liquid will appear when you start using it, and the color will not be painted properly.
Step 2: Let some of the paint out before starting to use it
If you try to apply the part immediately after shaking it firmly, the color may not come out well. Therefore, the trick to painting well is not to start painting immediately after shaking, but to let a little paint out in a paint dish or the like before starting to use it. The nibs of the Gundam markers are cut at a slight angle. Prepare a paint dish and press it into the dish to match the angle of the nib. You don't have to use a special paint dish, but you can substitute an unfolded milk carton or aluminum foil. If the paint comes out, stop pushing it and it's okay.
******************************************************************************************************************************
Let's actually use it !!
What kind of preparation should I do before painting?
First, look at your runners and make a plan for where to paint them. In this section, we will discuss the cylinder part of the internal mechanism.
When the parts are small, it is difficult to hold and apply by hand, and the cylinder part is said to be especially difficult to apply. When painting smaller parts, such as cylinders, it's a good idea to cut off the runner at the edge that surrounds the part and use it as a handle. The runner can be easily cut with nippers or other tools.
What are the key points when painting?
Finish the whole thing before the paint dries.
Paint from the tip of the part using the nib
******************************************************************************************************************************
Paneling techniques using Gundam markers
Paneling is a technique to draw lines and express shadows on the grooves, depressions, and molds of parts with "Gundam markers". By paneling, you can create a "shadow" or "three-dimensional" effect.
I'm sure you've seen it in the Star Wars mechs.
There are 3 different types and 3 different colors of Paneling marker.
TYPE
Fine Tip....basic type. you can paint strong panel line.
EXTRA THIN TYPE...use for painting broadly then wipe off, so You can't use it on areas where you're going to apply more paint.
MECHANICAL PENCIL...It's for pretty fine grooves.
COLOR
Black: Recommended for dark colored parts
Gray: Recommended for white parts
Brown: Recommended for red and yellow parts
When smearing for the first time, it is difficult to know which groove or mold to smear into. It means. So, you can refer to the "completed photo" on the instruction manual or the box of the Gundam model kits.
Let's trace the grooves in the parts and write!
If the smear fails, it can be fixed by remoover pen or tissue paper with alcohol. Also, I recommend cotton swabs.
Come on, give it a go!
introduction of plamo improvement commision
plamo improvement commision. Did you know that?
"plamo improvement commision." was born as a new brand to deliver to all those who build plastic models from beginners to veterans in order to build the ideal model life that everyone can't stop dreaming about." "A number of tools that put us in the maker's shoes produce a speedy and reasonable time and space for model making." It is a new comer of model making tools that will be rolled out in 2018./p>
Now that we know the concept, let's take a look at these tools.
First, the "workstation". It is a multi-functional worktable that can be used quickly when you feel like it and cleaned up quickly. This is the "basic" content of the set. It looks black and has a simple, non-cluttered design.
A built-in removable drawer underneath makes it easy to collect and dispose of accumulated scraps.
Inside, a dedicated cutting mat is also included. The special cutting mat, which is sized to fit just right, is not fixed and can be moved around freely.
The sides have recesses to keep the tools from rolling down.
In the photo, I'm placing a metal file, but it looks super handy for placing a design knife.
Nippers have a special shape, so it's hard to find a place to put them.
There is also a more advanced version of the workstation called the "Pro".
Basically, the functionality is the same as the "basic" one I mentioned earlier, with a few additional features. First, a loupe.".
By magnifying the image by about 3 to 5 times, you can do detailed work without difficulty. In addition, the connection is a flexible arm, so you can adjust it to your preferred position.
Next up is LED lighting. You can get enough light for your hands, which tend to be dark. It is also connected to a flexible arm, which allows you to position it freely. In addition, the Pro version has a built-in rechargeable battery.
Next is the original toolbox.
The basic colors are black, blue and red. It's good to use different colors for home use and for carrying around. The lids are the same color and there are variations in the bottom color. The size is smaller than the workstation.
Here's a picture of what I put inside. You can store all the tools you use for everyday crafts. The inside is pear-shaped to prevent slipping. There is a dedicated space in the bottom right for a square bottle of glue.
Lastly, the brush painting set All In One.
This is the perfect painting station for brush painting. It comes with all of these items. First, the white body.
First of all, the brush stand on the right.
The brushes that tend to roll easily and are scattered can be fixed firmly. Moreover, you can store this brush stand inside when not in use.
There are a number of 4mm holes in the back to hold the parts with handles.
This comes in handy! You won't have to worry about accidentally touching it or knocking it over. A special disposable paint dish can be set in the large hole in the foreground.
You can also set the included brush washing bottle. You can easily remove the paint on the brush by putting in a tool cleaner or something like that.
The Brush Painting Set All In One comes with a paint dish and cleaning bottle. All you have to do is buy this and you'll have all the tools you need for brush painting!
*****************************************************************************************************************************
That's all for the introduction. Every product of this new brand is amazing in its attention to detail. Moreover, all the tools are exquisitely easy to use. It's a tool for people who make plastic models, by people who make plastic models, and for people who make plastic models, and it looks like we can expect a lot from it.
Click here to see the sales page of the "Plastic Model Improvement Committee".
introduction MK2 JK series
Hi, this is Master TOM, chrysolina.
Charactor figures are becoming a trend in Japan. most of scale is 1/6-1/24. of course many modelers are enjoying with 1/12 otorcyclekits,1/24car kits... thus, If you are a Mschineller, maybe you have experience to paint 1/20, right ?
Of course you can make figures to go along with those other kits, but The recent trend is not limited to this, but also includes the creation of realistic figures that make full use of various expressions. The challenge of re-creating the "flesh and blood" is now underway.
In the midst of all this, this is Japan! Mr. Mattsuku is developing a product called It's the "JK" series. His product, which is sprinkled with fresh youthfulness, can be called a truly Japanese kawaii figure.
The point of his molding is that it is a digital prototype first of all. Therefore, even if it is a kit of small size of 1/20, delicate detail and molding of the face, even if it is a kit of small size of 1/20 Not only that, but you can even feel a fetishistic "aroma" on the accessories.
The next feature is that each one is a cut out of a "likely" natural gesture. Mr. Mattsuku's sharp aesthetic eye does not miss the moment and amplifies its charm as a product. They are being outputted. How do you cut out the "moment" when you feel even these "ordinary" movements?
And finally. With all this charm, his work has never been so straightforwardly sexy. I've never seen anything like it. Why do you end up feeling a fetish aroma in their extremely "healthy" charm? I'm sure you'll get a better understanding of that as you build and finish this kit.
Kawaii & Fetish. There is an unshakable sense of values there.
Tip on saving shpping costs when buying from Japan
Tip on saving shpping costs
Today, I'm going to take the opportunity to show you how to save on shipping costs when buying from our shop.
Keep in mind, due to a high lost/damage rate of over 30%, we don't use surface maritime shipping or no tracking shipping.
Though there are differences depending on its destination, there always will be a tracking service and insurance fee charged per parcel.
Also, there are fundamentally 3 types of air shipping with tracking. EMS, e-packet airmail and SAL airmail.
Within these shipping types, e-packet air and SAL air has a 2 step pricing solution. And out of the above, if the packet's height, length and width adds up to under 90cm and is under 2kg, Japan Post International shipping offers a cost-conscious service called "Small Packet BONUS". For details, please refer to the link below.
As many of you know, aside from oversized items such as a few large sized PVC figures and air compressors, many hobby items are much smaller than the dimmension limit set for the "Small Packet BONUS" service.
Thus, it is alot wiser to combine your purchases, choosing multiple items to fit the above mentioned dimensions, and have it sent in one shipping.
We have a few variations of boxes under the limited dimensions for customers buying multiple items in one purchase.
But, you might wonder how many items can we fit in the box. Let us show you an example.
Bandai HG series, MG-small box type, Kotobukiya small box type 3-5qties
Hasegawa,Fujimi,Aoshima small box type 1/24 car model, 1/72 air modeletc 3-4qties
We can only fit 1 of a Bandai MG flat box type or a Kotobukiya flat type box in the parcel. But there are spaces where we can fit small items like S.H. Figuarts and airbrush hand pieces.
Hope the tip helps you out with your shopping!
